SKSING通风过滤器01800.0-00FF018

打开谷瀑APP浏览
推广采购上谷瀑环保

立即打开

SKSING通风过滤器01800.0-00FF018

￥170.00

广东深圳龙岗区

深圳市欣广鑫科技有限公司

欣广鑫官方旗舰店

13年

指数：300

工商已认证

店铺推荐

图文详情
产品参数

风扇过滤器Sff018系列

一、产品特色
1、低噪音
2、体积小
3、多功能设计
4、易安装
5、防腐蚀，防紫外线
二、技术参数

轴流式滚珠风机	使用寿命*小50,000小时
连接方式	2 wries with pressure 2.5m㎡，length 100mm
外壳材料	淡灰色塑料，UL94V-0，V-0防火等级
机罩（风机过滤器和风机出风口）	淡灰色塑料，UL94V-0，V-0防火等级，防紫外线和防腐UL746C（f1）
安装架	用工业双面粘合剂固定在外面的附件上，在确认操作的情况下可以用在另外的螺丝。
过滤垫	过滤度94%，G4 acc.to DIN EN779，filtering degree 94%
过滤材料	高级合成纤维构造，100℃耐高温，F1型自灭材料，可循环清理洗涤或用吸尘器清理。
操作/储存环境	-45 to+70℃（-49 to+158°F）
防护等级	IP54/1（接地）

可用F5过滤器增加保护等级到IP55，但会减少空气流量。
三、产品示意图

四、产品优点：
1、安装架带粘性的封条阻止了灰尘和水进入到柜内。
2、通风口多功能的设计有效阻止了掉落的灰尘和水，其优势是过滤垫不会很快的被灰尘弄脏，这样就不需要经常更换。
3、风道使风机过滤器在操作中特别安静
4、多功能和现代化的设计使安装时间减少。
5、所有的风机过滤器，都有气流监控器。
6、EMC版本和其他电压可按要求提供。
7、空气的方向可以随轴流式风机方向的改变而改变。
五、订货编码

订货代号	操作电压	空气流量	空气流量（带过滤罩）	电流	功率	平均噪音	箱体深度	开孔尺寸	重量
01800.0-00	230VAC,50Hz	21m³/h	16m³/h	80mA	13W	31dB(A)	45mm	97×97mm+0.4	0.60kg
01801.0-00	230VAC,50Hz	55m³/h	42m³/h	100mA	15W	40dB(A)	58mm	125×125mm+0.4	1.00kg
01802.0-00	230VAC,50Hz	102m³/h	68m³/h	100mA	15W	39dB(A)	86mm	176×176mm+0.4	1.30kg
01800.0-01	120VAC,60Hz	24m³/h	18m³/h	160mA	13W	31dB(A)	45mm	97×97mm+0.4	0.60kg
01801.0-01	120VAC,60Hz	63m³/h	48m³/h	180mA	15W	40dB(A)	58mm	125×125mm+0.4	1.00kg
01802.0-01	120VAC,60Hz	117m³/h	78m³/h	180mA	15W	39dB(A)	86mm	176×176mm+0.4	1.30kg

FF018英文说明

Filter Fan FF 018 Series

Very low noise
Minimal depth in enclosure
Functional design
Time-saving installation
Weather proof and UV resistant

Filter fans are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating. The plastic used for the hood of this filter fan series is highly weather proof and UV light resistant.

Technical Data

Axial fan, ball bearing	service life 50,000h at 25°C / 77°F (65% RH)
	fan body aluminium, rotor plastic
Connection	2 wires with pressure clamps 2.5mm², length 100mm
Casing (filter fan and exit filter)	plastic according to UL94 V-0, light grey
Hood (filter fan and exit filter)	plastic according to UL94 V-0, light grey;
	weather proof and UV light resistant according to UL746C (f1)
Mounting frame	with double-sided industrial adhesive band for fixing to the
	outside of enclosure; certain operating circumstances can
	make the additional use of screws necessary (see drilling
	template); a template for the enclosure cut-out is included in the
	delivery of the filter fans
Filter mat	G4 acc. to DIN EN 779, filtering degree 94%
Filter material	synthetic fibre with progressive construction; temperature
	resistant to 100°C, self-extinguishing class F1,
	moisture resistant to 100% RH, reusable - cleaning by
	washing or vacuuming
Operating/Storage temperature	-10 to +70°C (+14 to +158°F) / -40 to +70°C (-40 to +158°F)
Operating/Storage humidity	max. 90% RH (non-condensing)
Protection type/Protection class	IP55 / I (earthed)

Special features
The self-adhesive seal of the mounting frame prevents dust and water from entering the cabinet.Functional designof the intake and exit fan hoods very effectively prevents direct intrusion of falling water and dust. The advantage is that the filter mat does not get so quickly contaminated with dirt and thus does not need to be exchanged so often.The air channeling makes the filter fan particularly quiet in operation.Functional and modern designenables time-saving assembly and maintenance.
The direction of air flow can easily be switched by reversing the axial fan (sizes 1 to 3).
EMC versions and other voltages on request.

Filter Fan FF 018 Series

Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series
Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series
Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series
Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series
Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series
Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series
Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series	Filter Fan FF 018 Series

通风过滤设备01800.0-00

Time-saving assembly and maintenance
´s filter fans are easily installed by one person from outside the cabinet. 1.) Make cut-out in the cabinet wall. The cut edge of the cabinet opening should be free of dirt, filings and grease. A template for the enclosure cut-out is included in the delivery of the filter fan. 2.) Remove protective film from the sealing strips on the mounting frame. Press mounting frame into the cabinet opening. The frame stays permanently in the cabinet. (For size 176mm and up we recommend additional screw fixing.) 3.) Electrically connect the axial fan using the clip connectors. Push the unit into the mounting frame. Fix using screws. 4.) Insert the filter mat in the hood. Clip on. Finished. Changing the filter mat or fan is quickly done by one person. To change the filter mat simply remove the filter hood, insert the new mat and snap the hood back again. No tools required. Maintenance of the fan can easily be done without removing the mounting frame (2).

Exit Filter EF 118 Series

Art. No.	Depth in enclosure	Enclosure cut-out	Weight (approx.)	Filter mat	Protection type
11800.0-00	16mm	97 x 97mm + 0.4	0.3kg	G4 acc. to DIN EN 779, filtering degree 94%	IP55
11801.0-00	16mm	125 x 125mm + 0.4	0.4kg	G4 acc. to DIN EN 779, filtering degree 94%	IP55
11802.0-00	16mm	176 x 176mm + 0.4	0.6kg	G4 acc. to DIN EN 779, filtering degree 94%	IP55

Filter Mat FM 086

Filter mat	89 x 89mm	118 x 118mm	168 x 168mm
G4 (1 packaging unit = 3 pcs.)	Art. No. 08600.0-00	Art. No. 08601.0-00	Art. No. 08602.0-00

Technical drawing

品牌：	SKSING
型号：	FF018
原理：	加压过滤
性能：	精密过滤
主体材质：	塑料
功率：	15 w
外形尺寸：	125*125 mm
设备重量：	1.3 kg