| Actuator |
Flat |
| Amperage Rating |
3 Amp |
| Application |
Hinged Covers and Guards to Machines, Hinged Doors and Gates in Safety Fencing Systems, Modular Aluminum Framing |
| Brand |
Banner |
| Catalog Description |
Banner Safety Interlock Switch With Load-Bearing Hinge,250 VAC,3 AMP,Contact Configuration: 1 NO, 1 NC Auxiliary,Contact rating: 3 AMP At 250 VAC Maximum, 0.5 AMP At 60 VDC Maximum,4-Pin Micro-Style Quick Disconnect,Zinc Die-Cast,97 MM Height X 72 MM Widt |
| Catalog Number |
SI-HG80DQD |
| Connection |
In-Line QD Fitting |
| Contact Configuration |
SPDT-1 NO/1 NC |
| Contact Rating |
3 Amp At 250 Volt AC Max, 0.5 Amp At 60 Volt DC Max 2.5 Kilo-Volt Max Transient Tolerance NEMA A300 P300 |
| Country Of Origin |
USA |
| Degree Of Protection |
IEC IP67 |
| Enclosure |
IEC IP67 NEMA 4 |
| GTIN |
00662488467319 |
| Item |
Hinge Safety Interlock Switch |
| Material |
Zinc Die-Cast |
| NEMA Rating |
NEMA 4 |
| Number Of Poles |
1 |
| Operating Cycles |
1 Million |
| Operating Temperature |
-25 to 75 deg C |
| Size |
2.830 Inch Width x 0.750 Inch Depth x 3.150 Inch Height |
| Special Features |
Safety switch is integrated and encapsulated into a load-bearing hinge, providing a high degree of protection from intentional defeat; Identical in appearance to non-switching blank hinge; Switch components concealed inside the hinge are protected from mechanical impact, providing superior performance to actuator-activated safety switches, rated IEC IP67; Hinge operates to a full 180 DEG range of motion, safety switching point (guard-closed position) is adjustable over the full 0 - 180 DEG operating range; Robust zinc die-cast housing is corrosion resistant; Short circuit protection: 6 AMP slow blow, 10 AMP fast blow, recommended external fusing or overload protection |
| Standard |
C/US CSA Listed, CE |
| Standards |
CSA Certified, CE Certified |
| Type |
Safety Interlock Switch With Load-Bearing Hinge |
| Voltage Rating |
250 Volt |
拨号
首页
飞语
我的
反馈
