如下为我司爱泽工业
IZE_Industries本月到货
SENTRY相关产品,欢迎致电索取样本资料和产品信息。
SENTRY冷却器TLR-4225
SENTRY减压阀VREL-11 7-00744A
SENTRY树脂柱RC-100
SENTRY冷却器TLR系列介绍及选型
Sentry® TLR 取样冷却器/热交换器可冷却工艺流中的样品。它看似简单,但却是设计独特的小型管壳式热交换器。要冷却的样品流过冷却器的管侧,冷却液流过壳侧。然后将冷却的样品送至实验室进行分析或通过管道输送至在线工艺仪表,以连续监测电导率、pH 值或其他化学成分等特性。
特点
• 双缠绕螺旋线圈设计
• *大限度地减少冷却水需求
• 多种特殊合金可提高耐腐蚀性
• 保留的壳侧垫片可减少重新组装时间
• 成型壳体消除了顶部壳体法兰焊接接口
• 无需拆卸法兰螺栓即可安装安装支架
• 如果需要更高的耐腐蚀性,则可提供所有 316 SS 结构
The Sentry® TLR sample cooler/heat exchanger cools a sample from a process stream. It may seem simple, but it is a uniquely designed small tube and shell heat exchanger. The sample to be cooled flows through the tube side of the cooler, and the cooling fluid flows through the shell side. The cooled sample then is taken to a laboratory for analysis or piped to in-line process instrumentation for continuous monitoring of properties such as conductivity, pH or other chemical constituents.
FEATURES
• Double-wound helical coil design
• Minimizes cooling water needs
• Wide variety of exotic alloys for corrosion resistance
• Retained shellside gasket reduces reassembly time
• Formed shell eliminates top shell flange weld interfaces
• Mounting bracket can be installed without removing flange bolts
• All 316 SS construction available where higher corrosive resistance is desired
SENTRY减压阀VREL系列介绍
现代发电厂的水和蒸汽样品的化学分析需要精确控制流量和压力。然而,高压减压需求可能会带来取样问题。Sentry VREL 控制阀由两根不锈钢管组成,连接到一个大管或桶上。锥形杆组件插入桶上的精密孔中。高压流体进入,流过一根杆,转动并流过另一根杆,然后流出。压降是插入桶中的杆的长度的函数。在层流条件下,压力平稳降低,通过不连续的压降将任何成分的解离降到*低。杆的位置通过转动旋钮从外部控制,可以在样品流动时进行调整。如果发生堵塞,可以缩回杆,这样系统压力就可以吹过固体物质。根据 ASTM 标准年鉴 ASTM 名称 D3370,Sentry VREL 控制阀是大于 500 psig(34.5 barg)样品的行业标准。
特点
• 符合人体工程学的调速手柄大大减少了转动力度
• 不会腐蚀阀门/调节器或拉丝
• 精细的流量控制
• 完全可伸缩杆确保轻松在线清洗
• 加长主体设计消除了弯管的可能性
• 流量从每分钟 150 毫升到每分钟 4 升,标准压降高达 5000 psig (345 barg),超临界发电厂应用压降高达 7803 psig (538 bar)
Chemical analysis of water and steam samples in modern power generation plants requires precise control of flow and pressure. However, high-pressure reduction needs can present sampling problems. The Sentry VREL control valve consists of two stainless steel tubes joined to a large tube or barrel. A tapered rod assembly is inserted into precision holes in the barrel. The high pressure fluid enters, flows past one rod, turns and flows past the other rod, and then out. Pressure drop is a function of the length of the rods inserted into the barrel. The pressure is reduced smoothly under laminar flow conditions, minimizing dissociation of any components through discontinuous pressure drops. The rod position is controlled externally by turning the knob, and can be adjusted while sample is flowing. If blockage occurs, the rods can be retracted so system pressure can blow the solid matter through. The Sentry VREL control valve is the industry standard for samples greater than 500 psig (34.5 barg) according to the Annual Book of ASTM Standards, ASTM Designation D3370.
FEATURES
• Ergonomic speed handle substantially reduces turning effort
• No valve/regulator erosion or wire drawing
• Fine flow control
• Fully retractable rods assure easy online purging
• Extended-body design eliminates possibility of bent tubes
• Flows from 150 milliliters per minute up to 4 liters per minute at pressure drops up to 5000 psig (345 barg) standard, and 7803 psig (538 bar) for supercritical power plant applications
SENTRY树脂柱RC-100系列介绍
Sentry® RC-100 可再填充离子交换树脂柱使树脂更换变得简单且经济,更大限度地减少了沟流,并且与柱直径低的竞争性柱相比,树脂效率更高。
特点
• 可再填充的透明塑料柱使树脂更换变得经济且简单
• PETG 柱可用于可能发生化学侵蚀的应用
• 提供*佳流体速度,提高树脂效率
• 专为水化学分析仪常见的流速而设计
• *大限度地减少检测化学紊乱所需的滞后时间
• 不使用 PVC;湿润材料不会渗出氯化物或增塑剂
• 端部配件为 1/8 英寸快速断开接头
The Sentry® RC-100 refillable ion exchange resin column make resin replacement easy and economical, minimizing channeling and achieving a higher resin efficiency than competitive columns with inefficient column diameters.
FEATURES
• Refillable, clear plastic column makes resin replacement economical and easy
• PETG columns available for applications where chemical attack may occur
• Provides optimum fluid velocity with increased resin efficiency
• Designed especially for flow rates common to water chemistry analyzers
• Minimizes lag time required to detect chemical upset
• No PVC used; wetted materials will not leach chlorides or plasticizers
• End fittings are 1/8-inch quick disconnects
SENTRY流体设备常用型号:
SENTRY TLR-4225
SENTRY TLR-4225U
SENTRY TLR-42B5
SENTRY TLR-42B5U
SENTRY TLR-4525(S)
SENTRY TLR-4525U(S)
SENTRY TLR-4BB5
SENTRY TLR-45B5U(S)
SENTRY FLR-6222
SENTRY FLR-6222U
SENTRY FLR-6225
SENTRY FLR-6225U
SENTRY FLR-6525(S)
SENTRY FLR-6525U(S)
SENTRY FLR-62B3
SENTRY FLR-62B3U
SENTRY FLR-6BB3
SENTRY FLR-65B3(S)
SENTRY VREL-11 7-00744A
SENTRY RC-100
SENTRY RC-101
SENTRY RC-200
SENTRY RC-400
SENTRY FSR-6222 7-03954C
SENTRY FSR-62B3 7-03954E
SENTRY FSR-6BB3 7-03954G
SENTRY FSR-6251 7-03954R
SENTRY FSR-6272 7-03954J
SENTRY FSR-6283 7-03954T
SENTRY FSR-65J4U 7-03954P
SENTRY FSR-6225 7-03954A
SENTRY FSR-6225U 7-03954B
如果您需要完整的
SENTRY的相关技术咨询,请随时致电爱泽工业,或者访问网站,我们将尽全力解决您的问题。