401脱氧剂能直接脱除惰性气体中的微量氧。反应时原料气既不需定量配入氢气,脱氧剂也不需频繁再生,脱氧容量较一般的脱氧剂大,对压力无要求,成本低廉,脱氧后的气体经吸附净化可制得高纯度气体。适用于氮、氩、氦、一氧化碳、二氧化碳等惰性气体的直接脱氧,特别适用于变压吸附制氮的后级纯化。
名称:脱氧柱
型号:401
规格:3m*1/8,60-80目
zui高使用温度:280°C
适用于:安捷伦6890,7890,8860,8890,岛津GC2014,GC-14C,GC-2010,GC-2030;赛默飞1310,布鲁克,PE
工业氢,氧,氮,氩,氦等高纯气体中氧的脱除
401 deoxidizer can directly remove trace amounts of oxygen from inert gases. During the reaction, the raw material gas does not require a quantitative addition of hydrogen gas, and the deoxidizer does not need to be frequently regenerated. The deoxidizing capacity is larger than that of general deoxidizers, and there is no pressure requirement. The cost is low, and the deoxidized gas can be purified by adsorption to produce high-purity gas. Suitable for direct deoxygenation of inert gases such as nitrogen, argon, helium, carbon monoxide, and carbon dioxide, especially for the post purification of nitrogen production by pressure swing adsorption.
Name: Deoxygenation Column
Model: 401
Specification: 3m * 1/8, 60-80 mesh
Maximum operating temperature: 280 ° C
Applicable to: Agilent 6890789088608890, Shimadzu GC2014, GC-14C,GC-2010,GC-2030; Thermo Fisher 1310, Brooke, PE
Removal of oxygen from high-purity gases such as industrial hydrogen, oxygen, nitrogen, argon, helium, etc